CIP270 Desk Phone User Guide

Thank you for purchasing the ClearlyIP CIP270 IP Desk Phone. The CIP270 is a next generation business IP phone designed to work with your favorite SIP based PBX or softswitch and can be easily provisioned free of charge using the ClearlyIP Device Manager software or the Clearly Devices module for FreePBX® based systems. It is a perfect choice for businesses looking for a high quality, feature rich IP phone at an affordable cost.

 

 

 

CIP270 USER GUIDE

CIP270 Button Overview

 

cip270 user guide

 

 

LED

POWER INDICATOR
Steady green when power on, blinking red when there are new messages.

LINE KEYS

  • Steady Green: During the conversation, or plan to dial a call.
  • Blinking Red: The call is ringing.
  • Off: Idle interface.

Answer a Call

THREE WAYS TO ANSWER A CALL

  • Handset: Pick up the handset.
  • Speaker: Press .
  • Headset: Press .

Note: You can also reject the call by pressing the “Reject” soft key.

End a Call

THREE WAYS TO END A CALL

  • Handset: Hang up the handset or press the cancel soft key.
  • Speaker: Press , or press the cancel soft key..
  • Headset: Press the cancel soft key.

Place a Call

THREE WAYS TO MAKE A CALL

  • Handset: Pick up the handset; enter the number, then press the send soft key or press #.
  • Speaker: Press or the line keys; enter the number, then press the send soft key or press #.
  • Headset: Press ; enter the number, then press the send soft key or press #.

Note: You can also use Contacts or call log to dial the number you want, press dial key and place the call by the three ways mentioned. More, you can also alternate the mode during the call.

Call Transfer

THREE WAYS TO TRANSFER A CALL
Blind Transfer:

  1. Press or Transfer soft key during the conversation, the call is on hold now.
  2. Edit the number that Transfers to.
  3. Press or the B Transfer soft key and now the blind Transfer completed.

Attended Transfer

  1. Press or Transfer soft key during the conversation, the call is on hold now.
  2. Enter the number that Transfer to and press the send soft key or #.
  3. Start the second conversation, press or Transfer soft key, then Transfer completed.

Semi-Attended Transfer

  1. Press or Transfer soft key during the conversation, the call is on hold now.
  2. Enter the number Transfer to, and then press #, then you can hear the ring tone.
  3. Press or the Tran soft key and now the Semi-attended Transfer completed.

Call Conference

ADDING MEMBERS TO A CONFERENCE CALL
Assuming that “A” and “B” are in conversation. “A” wants to bring “C” (or “D” & “E”) in a conference:

  1. “A” press “Hold”, the call is placed on hold.
  2. “A” press “New Call”, enter the number of “C” and then press send soft key or , “C” answers the call.
  3. “A” press or the conference soft key, then “A”, “B” and “C” are now in a conference.
  4. If add “D” & “E”, “A” press “Hold”, the current conference is on hold, press “New Call” and dial “D”, “D” answer the call. “A” Press “Hold” and “New Call” and dial “E”, “E” answer the call. “A” press “Hold” and “New Call” and dial “E”, “E” answers the call. “A” press , then “A”, “B”, “C”, “D” and “E” are in a conference.

Note: (1) If “C” does not answer the call, “A” can go back to continue to the conversation with “B”. (2) Once “A” hangs up the call, the conference ends, while if “B” or “C” drops the call, “A” & “C” or “A” & “B” conversation continues.

Mute Call

  • Press to mute the microphone during the call.
  • Press again to un-mute the conversation.

Redial

  • Press to redial the last call that was that was dialed.

Hold

  • Press the hold soft key during a call to hold the call.
  • Press resume soft key to resume the call.

 

 

CIP270 USER GUIDE

CIP270 Configuration

Configuration Via Phone
  1. Press Menu → Setting → Advanced Settings (Default password: admin)
  2. Select Network: To configure the Wan Port (DHCP/Static/PPPoE), PC Port etc.
  3. Select Accounts: Enable the account, fill in the SIP Server, Outbound Proxy and the SIP registration information.
Configuration Via Web
  1. Get the IP address from the phone: Press Menu → Status → Information.
  2. Login: Input the IP address in the web browser. The PC and phone should be in the same IP address segment (Login name: admin ; Default password: admin).
  3. Configuration: Fill in the SIP Server info on the Profile page and the Account registration info on the Account page.
  4. Click on SaveSet and Restart the Phone if needed.
CIP270 USER GUIDE

CIP270 Connection Diagram

cip270 user guide

CIP270 Phone Stand Diagram


 

 

Discover All of Our CIP Series Desk Phones

View Phones